CHAPTER 6: STATUS AND OPTIONS SCREENS
|
39
APs Status Screen
Use the
APs
page in Infrastructure mode to view access points with the
same ESSID as the adapter within the wireless network.
View the AP MAC address and signal of each located access point.
Radiation marks beside the antenna indicate the currently associated access
point. If the current WLAN Card signal strength is poor, one of the access
points displayed could provide a stronger signal.
Select and tap on an access point to display a pop-up menu used for setting
the adapter’s access point roaming capabilities.
•
Selecting
Set Mandatory
prohibits the adapter from associating
with a different access point. The letter
M
displays on top of
the AP diagram when the
Set Mandatory
option is selected.
•
Selecting
Set Roaming
enables the adapter to roam to another AP.
Tap
Refresh
to update the list of APs in range.
Note: The APs
page is only
accessible in the
Infrastructure
operating mode.
