Chapter 5 : Menus
UPS/NTA GB/ DELMX_EXPC1C3C6.B
page 31
12. COMMENTS CONCERNING THE MENUS
12.1. Menu measurements
This menu displays the following system measurements:
- general measurements of the UPS
- output power of the UPS,
- inverter and bypass measurements,
- rectifier measurements.
12.2. Menu UPS Commands
The UPS command menu enables (Please refer to section related to the menu structure) :
- the automatic start up (interactive procedure)
- the transfer from the inverter to the mains (and vice-versa),
- the transfer to the maintenance bypass (interactive procedure),
Note : in the event of a modular system, the UPS COMMANDS menu is common to all the units
connected. The control can be performed on whatever unit.
12.3. Menu Event log
Principle :
The UPS has a memory enabling the record and date all alarms, status or commands that could
arise during operation. This memory is saved utilising a separate supply.
The log can record up to 500 items according to the FIFO principle (First In - First out). When the
log is filled up, the latest information recorded overwrites the earliest one.
Use :
To improve the user-friendliness of the display, the information is displayed over six lines.
"
t
" : to scroll up to previous line,
"
u
" : to scroll down to next line,
