Chapter 5 : Menus
UPS/NTA GB/ DELMX_EXPC1C3C6.B
page 37
For coding with less than 6 characters, validation key needs to be pressed up to the sixth
character, and once more for validation.
CONFIGURATION: ACCESS CODE
CONFIRM NEW
ACCESS CODE: ??????
cancel validate
ESC
ENTER
Note : the access code is only activated when the display is in standby, i.e. after 4 minutes
without action on any key.
12.8.4. Local / Remote
The UPS can be fitted with a remote control. By default the control panel is the master while
the remote control is the slave. The local / remote menu enables the operator to convert the
remote control into the master : thus the control panel automatically has slave function. This
command can only be made from the local control panel.
Title screen / configuration / local - remote
CONFIGURATION:LOCAL-REMOTE
t
Switch to: LOCAL MONITORING
u
cancel validate
ESC
ENTER
12.9. JBUS link
Note : the JBUS link menu is only displayed if the setting is available on the UPS.
Configuration parameters are :
- the baudrate (1200 to 19200),
- the parity (none, even, odd),
- the slave number (001 to 255).
Title screen / JBUS link / programming.
I
PROGRAMMING
I
I baudrate: 19200
I
I Parity:
NONE
I
I Slave:
001
JBUS LINK
I
