7
EN
ATyS p M - 542935E - SOCOMEC
2. INTRODUCTION
ATyS p M “Automatic Transfer Switching Equipment” (ATSE) is designed for use in power systems for the safe
transfer of a load supply between a normal and an alternate source. The changeover is done in open transition and
with minimum supply interruption during transfer ensuring full compliance with IEC 60947-6-1, GB 14048-11 and
other international TSE standards as listed.
The ATyS p M is a full load break (switch type) derived transfer switching equipment where the main components are
proven technology devices also fulfilling requirements in IEC 60947-3 standards.
As a Class PC ATSE, the ATyS p M is capable of “making and withstanding short circuit currents” assigned to
IEC 60947-3 utilization categories of up to AC23A, GB 14048-11, IEC 60947-6-1 and equivalent standards with
utilization categories of up to AC33B.
ATyS p M transfer switches ensure:
•
Power Control and Safety between a normal and an alternate source.
•
A complete product delivered as a fully assembled and tested solution.
•
Intuitive HMI for emergency / local operation.
•
Integrated and robust switch disconnection.
•
Window with clearly visible position indication I – 0 - II.
•
An inherent failsafe mechanical interlock.
•
Stable positions (I – 0 – II) non affected by typical vibration and shocks.
•
Constant pressure on the contacts non affected by network voltage.
•
Energy Efficient with virtually no consumption whilst on the normal, alternate or off positions.
•
Extremely rugged, error free and built in padlocking facility (configurable).
•
Straight forward installation with effective ergonomics.
•
Programmable secure motorization controls interface.
•
User configurable I/O with communication through Modbus
®
(RS485) Optional
•
ATS configuration through a keypad as well as through EasyConfig programming software.
•
Auxiliary contacts for switch positions I – 0 - II (optional).
•
“Product availability” output.
•
Ample accessories to suit specific requirements.
•
Fully integrated ATS controller specifically designed for Mains / Mains and Mains / Genset applications.
2.1.
The ATyS family product range
Just the right ATyS for your application…
ATyS: Small Footprint
Back to Back
Configuration
125A - 3200A
ATyS M: Modular Profile
40A - 160A
40A - 125A
ATyS d S
Small Genset
with DPS
ATyS S
(RTSE)
Small Genset
ATyS p
Power / Genset
Management
ATyS g
Simple Genset
Management
ATyS t
Transformer
Management
ATyS d
RTSE (DPS)
ATyS r
RTSE
(1)
ATyS
RTSE
ATyS p M
Evolved Genset
Management
ATyS g M
Simple Genset
Management
ATyS t M
Transformer (building)
Management
ATyS d M
RTSE (DPS)
Side by Side
Configuration
(1)
The UL version of ATyS r is available from 100 - 400A
