13
EN
DATALOGGER H80-81 - 546 226 A - SOCOMEC
4 .3 .2 . Adding devices to DATALOG H80/H81:
To add devices, the user can right mouse click on the root of the tree (devices tab) to access 2 options:
• The purpose of the "
Auto-discovery of devices
" function is to identify all devices connected to DATALOG H80/
H81. It allows users to simplify adding devices by scrolling through all devices in DATALOG H80/H81.
• The “
Add a device
” function allows users to create devices, one by one.
4 .3 .3 . Auto discovery of devices
This function allows users to auto-discover devices connected to DATALOG H80/H81:
• New device: New devices compared with current configuration
• Modified device: Existing devices in the current configuration, but with some changed settings
• Device in conflict: Device for which the configuration conflicts with others (example same IP address for
gateways)
• Device not found: Devices not found at the launch of the auto-discovery process, even though they are in the
previous configuration
By starting the “
Auto-discovery of devices
” function, all devices found, classified by gateway, will be presented to
the user.
The user can individually select (check / uncheck) devices that he wishes to update in the configuration of
DATALOG H80/H81.
