21
CPSS Emergency MASTERYS EM
10 to 80 kVA - Ref.: IOMMASELXX03-GB 00
7. MENU
COMMANDS MENU
This is used to send various immediate commands to activate the UPS or various operating modes. It can also be used to send
extended commands to define some UPS settings. To activate the commands select the command with UP
or DOWN
,
press ENTER, select YES or NO to execute and press ENTER to confirm. The EXTENDED CONTROLS menu can only be seen if it
is enabled in the menu CONFIGURATION.
IMMEDIATE COMMANDS menu
Command
Description
START PROCEDURE
UPS start-up command.
STOP PROCEDURE
UPS shutdown command.
MAINTENANCE BY-PASS PROCEDURE
Command to activate the manual bypass and shutdown of the UPS.
HIGH EFFICIENCY MODE
Activates Eco mode / always on mode.
NORMAL MODE
Activates normal double conversion operation.
ALARM RESET
Resets all alarms.
LEDS TEST
Performs the test on the mimic panel LEDs.
EXTENDED COMMAND menu
Command
Description
MANUAL BATTERY TEST
Activates the battery test.
BATTERY COMMISSIONING
Activates battery commissioning (use only if necessary for the
type of battery).
SET LAN DEFAULT VALUE
Resets all LAN values.
JBUS TUNNELLING ENABLE
JBUS TUNNELLING DISABLE
Enables the connection of advanced software (BMS or Uni vi-
sion) via the LAN network.
DHCP ENABLE
DHCP DISABLE
Enables the automatic allocation of the IP address by the net-
work server.
FORCE MODEM DIAL OUT
Forces an immediate test modem call.
DISABLE CHECK-UP
Deactivates the routine maintenance message.
PARAMETERS MENU
Displays only the configuration parameters set for the UPS.
The messages in this menu are identified by an asterisk in the configuration service menu.
The parameters can only be changed by entering the service / configuration menu.
CURRENT DATA menu
Message
Description
SYNOPTIC
SN. 0000000000
FW. X.XX CKS. XXXX
Identifi es the size, phase confi guation input and output, and
the serial number for the UPS.
SYNOPTIC LAN
MAC ADDRESS: XX . XX . XX . XX . XX . XX
FW X.XX
Identifi es the Mac address of LAN PCB.
DIGITAL ENGINE
UP RV 000 CKS: 0000
DSP RV 000 CKS: 0000
Identifi es the micro processor software version.
Identifi es the Mac address of LAN PCB.
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK