MASTERYS BC
from 15 to 20 kVA
0
IT
ALIANOENGLISH
MIMIC PANEL
6
“CIM Alarms Code” menu.
This displays the service code to be sent to the support service to make an accurate and rapid diagnostic of the
possible failure.
In the event of a fault, select the menu
SERVICE
>
CIM ALARMS CODE
and inform the support centre of the
code displayed..
ALARMS CODE 1/2
1) 0000
2) 0000
ALARMS CODE 2/2
3) 0000
4) 0000
An error message is displayed if the code is incorrect. Check that the code displayed corresponds to the one
provided by the Support Centre and repeat the procedure.
“Warranty Code” menu.
During activation of the equipment a warranty activation code, made up of four characters, is requested to
complete the start-up procedure.
5.3 WARRANTY CD
ENT PROCEDURE
The activation code is provided directly by the reference Support Centre upon communication of the serial
number of the equipment which is displayed in the next message by pressing
ENTER
.
WARRANTY CODE
SN: 0000000000
Inserting the code does not limit the availability of the equipment’s functionality.
When contact is made with the Support Centre for the activation code, detailed information can be obtained
on the UPS functions available and on the periodic preventive maintenance programmes.
Once the code is obtained, enter it by pressing
ENTER
to activate the entry (two asterisks will appear). Select
the first character with the
UP
and
DOWN
keys and confirm with
ENTER
to accept the character. Then
move on to the next character. Pressing the
ENTER
key after selecting the fourth character activates code.
WARRANTY CODE
ENT CODE - - - -
Summary of Contents for Masterys MAS2BC115M+D1
Page 1: ...INSTALLATION AND OPERATING MANUAL MASTERYS BC from 15 to 20 kVA...
Page 2: ...ITALIANO...
Page 48: ...ITALIANO FRAN AIS...