!
!
During the work, non-authorized people must not be allowed to stay in an area, which
operating range is less than
20 meters
from the hammer. The people in charge of
the building site will prevent this from happening.
!
!
1
General warnings
1.1 Operator safety rules
While working the hammer vibrates: thus it is dangerous to touch it or leave any object on it.
The hammer must be started by the operator whose working position is in front of the control board of the
carrier.
The person in charge of the safety rules must give the operator all the instructions for the correct
use of the hammer. The operator must also know how the carrier works, enquire about its safety
measures and strictly obserre them.
The operator must be familiar with the technical characteristics of the hammer and especially with
pressures, oil flow rates, dimensions of the flexible hoses and connections.
Before using the hammer and according to the type of work, the operator must get the following
equipments: safety glasses, dust-mask, helmet, earmufes, etc.
Large and loose clothes, watches and other types of bracelets are dangerous,
The operator must not make use alcohol or drugs medicines which can produce sleepiness while
working.
The working area must be indicated and illuminated.
The operator must follow the maintenance program proposed by the manufacturer and make sure
that the hammer is in good conditions.
After work, the temperature of the tool can be very high: so it is necessary to leave it to cool before
touching or in any case to protect hands with working gloves.
It is absolutely forbidden to temper with the safety devices and to eliminate or
modify the protections.
All actions representing a situation of potential danger for the operators are pointed out by
the sign reproduced aside.
All actions requiring a special attention are pointed out by the sign reproduced aside.
According to the CE regulation nr.
2006/42/CE
and subsequent bringing up to date we specify that
: by
“Operator” we mean the person or the people in charge of installing, operating, servicing,
cleaning, repairing and transporting the machine.
GENERAL WARNINGS
5
Page
of 48
1
Nederland B.V.
Summary of Contents for MDO 1600 TS
Page 34: ...44 39 41 43 45 36 35 38 40 42 46 37 STROKE CHANGER 34 Page of 48 10 Nederland B V ...
Page 40: ...101 96 98 100 99 97 DISTRIBUTOR GROUP 40 Page of 48 13 Nederland B V ...
Page 42: ...107 104 106 101 105 109 108 103 102 ACCUMULATOR GROUP 42 Page of 48 14 Nederland B V ...
Page 46: ...129 132 125 134 127 128 126 133 130 133 131 GREASING SYSTEM 46 Page of 48 16 Nederland B V ...