NETYS RT Hot Swap 7 - 11 kVA - 551574B - SOCOMEC
19
EN
No.
Multi-
function
Button
Description
3
Enter
Button
The button has multiple functions. Please refer to the
following for detailed information.
1. Entering into the setup mode
In the Main Screen (that shows the current operating
mode), press the button for 0.1 seconds and the UPS will
enter the Main Menu (setup mode). Please refer to
Chapter
9: LCD Display & Settings
.
2. Selecting and confirming the parameter in setup mode
In setup mode, press the button to choose the parameter
you want to change, and the parameter will flash. Press
the Scrolling Up or the Scrolling Down button to change
the parameter and press the button again to confirm the
change.
4
Scrolling
Up Button
The button has multiple functions. Please refer to the
following for detailed information.
1. Scrolling Up/ Increasing Number
- In the Main Screen, press the button for 0.1 seconds
and the UPS will directly enter the Measurement Menu’s
level 3 (see
Figure 9-1: Menu Tree
), which contains
related Output information.
- In setup up mode, the button is used to navigate the setting
items. Press the button for 0.1 seconds to go to the previous
setting item.
5
Scrolling
Up Button
(Continued)
The button is also used to navigate or set up the setting
parameter. Press the button for 0.1 seconds to go to the
previous display or to increase a number. If the button
is pressed for more than 2 seconds, the number will be
increased a single digit every 0.2 seconds automatically
until the button is released or the number reaches its
highest value.
2. LCD Reset
Press the Scrolling Up and the Scrolling Down buttons
together for 3 seconds to reset the LCD display.
