2
SAFETY
Chap.
2
Page
4/11
THIS MANUAL IS PROPERTY OF
SOCOMEC UPS
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
ENGLISH
EN
2.1 SAFETY
(pdu16.01.01)
DO NOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF. OPENING OR
REMOVING THE COVER MAY EXPOSE YOU TO DANGEROUS VOLTAGES, EVEN
WHEN THE AC CORD IS DISCONNECTED FROM THE ELECTRICAL SOCKET.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
operation of the PDU 16
This product is designed for commercial / industrial use only, with UPS systems. It is not
intended for use with life support and other designated “critical” devices. Do not exceed PDU or
UPS rating labels.
Do not exceed PDU or UPS rating labels.
Read all safety and operating instructions before operating the PDU 16 and the connected UPS
system. Adhere to all warnings on the unit and in this manual. Follow all operating and user
instructions.
Turn the UPS off and unplug the PDU 16 before cleaning. Use only a soft cloth, never liquid or
aerosol cleaners.
The UPS and PDU 16 are designed for data processing equipment. Do not plug laser printers or
appliances, such as hair dryers, heaters, vacuum cleaners, or electrical drills, into the UPS
output sockets.
DO NOT MODIFY THE CABLES IN ANY WAY. THE PDU SOCKETS SHOULD MATCH
THE UPS SOCKETS. THE PDU 16 MUST BE EARTHED AT ALL TIMES WHILE IN
USE. TURN OFF THE UPS BEFORE UNPLUGGING IT.
The UPS and the PDU 16 are equipped with earthed plugs (plug types vary depending on
model). Do not defeat the safety purpose of this plug. If unable to fully insert the plug into the
designated socket, contact a qualified electrician or your local dealer or representative for
assistance.
Route power supply cords so they are not walked on or pinched in any way.
Risk of electric shock, do not remove cover, no user serviceable parts inside.
Refer servicing to qualified service personnel.
This device receives power from multiple sources. Before servicing this device,
remove all connections. Before servicing the UPS, follow “Maintenance of UPS”
instructions in the user manual for your UPS.
For use in a controlled environment. Refer to manual specifications for
environmental conditions.
WHEN THE PDU 16 IS IN MAINS POSITION (MAINTENANCE BYPASS) MODE, THE
POWER TO THE CONNECTED LOAD IS NOT FILTERED OR CONDITIONED BY THE
UPS. CONNECTED EQUIPMENT GUARANTEE IS NOT VALID WHILE IN THIS MODE
OF OPERATION.
Summary of Contents for PDU 16
Page 1: ...PDU 16 OPERATING MANUAL...
