3
INTRODUCTION AND SYSTEM DESCRIPTION
Chap.
3
Page
6/11
THIS MANUAL IS PROPERTY OF
SOCOMEC UPS
-
ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
ENGLISH
EN
3.1 INTRODUCTION
(pdu16.02.01)
Congratulations on your choice of the PDU 16. The PDU 16 provides maintenance bypass
capability as well as power output distribution. The PDU 16 can be used on UPSs in the rack
mount or tower configuration.
The PDU 16 provides an isolated path of power for your UPS system for preventive
maintenance or service.
3.2 SYSTEM
DESCRIPTION
(pdu16.02.02)
The PDU 16 has two modes of operation: UPS (UPS available) and MAINS (maintenance
bypass)
In UPS mode, the power is routed through the UPS system delivering conditioned power
to the load, as shown in Figure 1.
UPS mode of operation.
Figure
1
In MAINS mode, the power is routed around (bypassing) the UPS system (see Figure 2).
Mains power is supplied directly to the load through the PDU 16.
Battery back-up and conditioned power are NOT available during the MAINS mode of
operation.
MAINS/maintenance bypass mode
Figure
2
The UPS may be turned off and removed without affecting the load.
Summary of Contents for PDU 16
Page 1: ...PDU 16 OPERATING MANUAL...
