background image

4

SUNSYS FJB

 - Ref.: IOMSUNIFXX01-GB  00

4

1.1.  

GENERAL INFORMATION

Socomec Field Junction Box is designed to make the connection of groups of strings (photovoltaic panels) to an inverter in photo-
voltaic applications.

Basic functions :

•  Connection and combination of the photovoltaic strings

•  Switching OFF and disconnection of the DC voltage of the installation

•  Protection against the over-currents of all the polarities

•  Fault signalling on the PV string (fuse indicator).

•  Protection against atmospheric over-voltage

Optional functions

•  Remote control switching OFF and disconnection.

•  Canopy against solar radiations

1.2.  GENERAL SAFETY RECOMMENDATIONS

•  Always read this instructions manual before commissioning the equipment.

The DC voltage upstream fuse-disconnectors is never disconnected even the position of the switching products. 
The DC voltage level is dangerous. Any contact can cause an electrocution or an electric shock.

•  The devices shall be accessible to authorized personnel only.

•  Unauthorized opening of the device or improper interventions can lead to personnel severe injury, death or material damage.

•  Repairs on the boards must be carried out only by the manufacturer or by personnel authorized by the manufacturer.

•  Any repair works must only be carried out by qualified personnel.

•  Any repair works must only be carried out using original spare parts.

•  Original spare parts are available through SOCOMEC customer assistance service.

•  Check protective devices regularly, following the indications in the chapter Electrical installation, operation and maintenance.

•  Use only fuses of the correct dimensions. The rated current of the fuses must be calculated according to each plant specifications.

•  The Socomec Field Junction Box must be used in accordance with the documentation as well as applicable directives and stan-

dards.

•  The Socomec Field Junction Box must be handled with care, and protected against mechanical stresses.

•  Do not bend any components.

•  Do not change the isolating distances.

•  Do not touch electronic components or contacts.

•  The Socomec Field Junction Box contains components that are sensitive to electrostatic charges and may be damaged if handled 

improperly.

•  Any use of damaged or spoiled components shall be considered as a non-compliance with the applicable standard.

It is forbidden to make any modification to the Field Junction Box without the prior agreement of Socomec.

1.3. PERSONNEL 

QUALIFICATION

Personnel must be familiar with the installation, assembly, commissioning and operation of the device and know the possible sources 
of danger and must have the required qualification to perform maintenance and commissioning. 

This qualification must include:

•  Mechanical installation of the device: Trained installation technician with basic electrical skills

•  Electrical installation of the device: Trained electricians

•  Commissioning of the device: Trained electricians

1. SAFETY INSTRUCTIONS

Summary of Contents for SUNSYS FJB

















Reviews: