14
en
■
Re
fi
lling and servicing of the CO
2
cyl-
inder may only be done by authorised
specialist companies. Further informa-
tion is available at
www.sodatrend.de
■
Never pull the CO
2
cylinder out of the
device during operation.
■
Store the CO
2
cylinder in a cool place.
Never expose it to temperatures of
above 50°C. Keep it away from direct
sunlight.
■
The CO
2
cylinder must be at room tem-
perature before it is used / inserted into
the device. If this is not the case,
fi
rst
allow the CO
2
cylinder to cool down
slowly (do not place it in the fridge!)
or heat up slowly (do not place it on a
heat source!).
■
Do not damage it or burn the CO
2
cyl-
inder.
Water Bottle
■
Do not freeze or
fi
ll the water bottle with
hot liquids. This could cause cracking
in the water bottle which could result
in the water bottle bursting during the
carbonisation process.
■
Note the use-by date printed on the
PET bottle. After the use-by date has
expired, the bottle must be replaced.
Further information is available at
www.sodatrend.de.
■
Never clean the PET bottle and the
caps in the dishwasher.
■
Never attempt to
fi
ll an empty bottle
with CO
2
.
■
When
fi
lling, do not exceed the line
marked on the water bottle.
■
When the
fi
lled water bottle is moved,
the carbonic acid may cause an excess
pressure to be created. You should
therefore always open the water bottle
slowly and carefully so that the pres-
sure can escape in a controlled man-
ner. When you do this, hold the neck of
the bottle away from your body.
■
Do not drink directly from the bottle to
prevent contamination.
Items Supplied
(See front fold-out page for illustrations)
A
1x soda maker
B
1x glass bottle with screw cap
C
1x CO2 cylinder (60 l)
D
1x adapter for the CO2 cylinder
E
Also supplied depending on the offer:
1x PET bottle with screw cap
1x instruction manual
The quantity of accessories may vary de-
pending on the offer.
Soda Maker at a Glance
(See front fold-out page for illustrations)
1
Trigger button
2
Release button
3
Cylinder holder
4
Lever
5
Back cover
6
Drip tray
7
Door
8
Nozzle
9
Bottle holder
