18
en
During the bubbling process, there is
a hiss from the back of the device.
The adapter on the CO
2
cylinder is not
fi
rmly tightened.
►
Tighten the adapter.
The sealing ring in the adapter is missing.
►
Replace the adapter.
The CO
2
cylinder valve does not close.
►
Press the trigger button 1 to 2 times
so that the valve can close. If the
problem persists, allow the CO
2
cyl-
inder in the device to empty itself in
a well-ventilated place or outdoors.
Contact our customer service depart-
ment.
The strength of the bubbles is com-
paratively weak or there are no bub-
bles at all.
The door is not closed correctly.
►
For safety reasons, bubbles can only
be produced when the door is fully
closed. Close the door as far as it will
go.
The CO
2
cylinder is empty.
►
Replace the CO
2
cylinder.
The CO
2
cylinder is too cold (e.g. owing to
transport in winter).
►
Allow the CO
2
cylinder to warm up
slowly at room temperature.
The water is too warm.
►
Pour cold water into the water bottle.
Not enough water in the water bottle.
►
Fill the water bottle up to the line
which is marked on it.
Technical Data
Article number: 06252 (black),
06261 (red),
06262 (anthracite),
06280 (white)
Model number: P00268
Max. operating pressure: 7 bar / 102 psi
Max. operating temperature: 40°C
Capacity of glass bottle: 720 ml
Capacity of PET bottle:
850 ml
CO
2
cylinder:
–
Volume:
0.6
l
–
Fill quantity: 425 g
–
Diameter:
approx.
6
cm
–
Capacity: for up to 60 l of water
–
Carbon dioxide CO
2
for food E290
–
EC:204-696-9 Class 2 Code 2A
Disposal
The packaging material is recycla-
ble. Dispose of the packaging in an
environmentally friendly manner
and take it to a recycling centre.
The device should not be disposed
of alongside general household
waste. Dispose of it in an environ-
mentally friendly manner at a re-
cycling centre and comply with all
the relevant regulations. For more
information, contact your local au-
thorities.
All rights reserved.
