page
4
of 24
mod.
JUMBO 13
- man. rev. 00
Manual of SODASTREAM Professional SRL Unipersonale. No reproduction allowed without previous authorization by
the owner.
Operating modes
The cooler is designed and manufactured to dispense water. Any other use is
considered improper. The manufacturer is not liable for damages caused by
improper use of the cooler.
Electrical safety
Warning:
Electrical system grounding must meet current laws. Electrical
connections must be carried out by qualified technicians only, according to
the instructions.
Warning:
This is an electrically powered system. Therefore, it is important to
follow the safety regulations below:
Do not touch the plug with wet hands.
Make sure the plug is easily accessible to be able to unplug the
cooler if necessary.
In the event of system malfunctions, do not attempt to repair it. Turn
it off using the main switch, unplug the plug and contact Customer
service. Make sure the power voltage matches the value indicated in
the identification plate on the back of the system. Connect the
system to a correctly installed socket with efficient grounding. If the
socket does not match the system plug, have qualified personnel
replace the socket with the appropriate type. Do not use power strips
or extensions.
During installation and use
Warning
Pay the utmost care during system handling in order not to damage
the cooling circuit components and to avoid gas leaks
Warning
Avoid prolonged system exposure to direct sunlight
Warning
Do not bend tubes excessively during system installation
After unpacking the cooler, make sure the product is complete and not damaged and
that all components are included.
Do not use the system if visibly damaged. Contact Customer service.
