Sodex Sport S16118 Assembly Instructions Manual Download

Page: 5 / 7

6– FIXATION OF REAR FRAME & GROUND FRAME

(x4)

NECESSARY

ITEMS

ASSEMBLY

Turn knobs M10x50

7– STABILIZE THE GOAL

(x2)

NECESSARY

ITEMS

Tur

eigh

POST

Rubber

counterweight

Note: Put the counterweights on the rear

bars, paying attention to these details:

- The slot done under the counterweight

is done to receive the rear bar

- The lower side of the counterweight

has to be put into the goal, in order to

lead the ball into the net when it hits it.

- Place the counterweights regularly

along the rear bar, in order to make the

goal as stable as possible.

Summary of Contents for S16118

Page 2: ...EMBLY FOR LEFT POST CROSS BAR RIGHT POST SS screws M10x30 SS Washers 10 x4 Turn knobs M10x50 Step 01 Step 02 Mallet Wrench 17mm Wrench 13mm x24 SS Washers 8 SS Screws M8x20 x24 x12 SS Locknut M10 x32 SS Washers 10 x4 SS Screws M10x100 x4 Part thread SS screws M10x55 x4 Part thread SS screws M10x65 x8 SS Screws M10x30 x2 SS Washers 10 x2 SS Screws M10x30 ...

Page 3: ... 8 SIDE GROUND BAR REAR GROUND BAR SS Screws M8x20 SS Washers 8 Note The hooks on the upper frame have to be on the inside of the goal while the hooks on the ground frame have to be on the outside of the goal Upper frame Ground frame x2 SS Washers 8 SS Screws M8x20 x2 SS Screws M8x20 SS Washers 8 x4 SS Washers 8 SS Screws M8x20 x4 ...

Page 5: ...nterweight Note Put the counterweights on the rear bars paying attention to these details The slot done under the counterweight is done to receive the rear bar The lower side of the counterweight has to be put into the goal in order to lead the ball into the net when it hits it Place the counterweights regularly along the rear bar in order to make the goal as stable as possible ...