11
2.4 Calibration notes
The scope of this information is Germany. In other countries, conformity with national laws must be checked.
Terminal 3025 is approved within the EU for Class III and IIII custody transfer.
It corresponds to the type described in the type approval as well as to the applicable requirements of
Directives 2014/31/EU, 2014/30/EU, 2014/35/EU and EN 45501.
In accordance with legal requirements, calibrated scales must be recalibrated at regular intervals. Please
contact a Soehnle Industrial Solutions service center or your local calibration office.
Do not under any circumstances damage the official seals, otherwise the calibration validity will expire.
2.4.1 Nameplate
The terminal has an electronic nameplate.
Display after pressing the Info button:
Brutto/
Netto
F 1
F 2
F 3
F 4
F 5
F 6
01
Gewichtswert Dimensions-
zeichen
Max
Min
e=
SNR XXXX/XX-XXXX
Eichz: XXXX
IDENT-Chip
2.4.2 Calibration counter
The calibration counter indicates how often a scale has been calibrated. The stored counter reading must
match the calibration counter reading secured by a sticker. The current calibration counter reading can be
displayed in the setting mode under Scale / Scale parameters for each connected scale.
Gross
/Net
Weight value
Dimension
symbol
Summary of Contents for 3025
Page 1: ...www soehnle professional com Operation Manual Terminal 3025 ...
Page 114: ...114 ...
Page 115: ...115 ...