36
10
Batch processing
(further details see also manual 3025 Chapter 7.10)
Batch code 4 parameter
source
as Batch code 1 parameter source
Batch code 5 parameter
source
as Batch code 1 parameter source
Batch
activation key
Selection
> No key
> Print key
> Enter key
Factory setting: No key
Pause between
batch code 1 - 2
Input
Time for the pause between the batch codes, numeric via numeric keypad
Factory setting: 100 ms
Pause between
batch code 2 - 3
Input
Time for the pause between the batch codes, numeric via numeric keypad
Factory setting: 100 ms
Pause between
batch code 3 - 4
Input
Time for the pause between the batch codes, numeric via numeric keypad
Factory setting: 100 ms
Pause between
batch code 4 - 5
Input
Time for the pause between the batch codes, numeric via numeric keypad
Factory setting: 100 ms
Pause after end
Input
Time for the pause at the end, numeric via numeric keypad
Factory setting: 100 ms
11
IO-control
(further details see also manual 3025 Chapter 7.11)
IO - mode
Selection
> off
> on
> on, safety function
Factory setting: off
Outputs
Selection
for the assignment of the individual switching points
> Switching point S1
> Switching point S2
> Switching point S3
> Switching point S4
> Switching point S5
> Switching point S6
Factory setting: all not active
Inputs
Selection
for the assignment of the individual inputs
> Input E1
> Input E2
> Input E3
> Input E4
Factory setting: all not active
Summary of Contents for 3025
Page 1: ...www soehnle professional com Operation Manual Terminal 3025 ...
Page 114: ...114 ...
Page 115: ...115 ...