14
EN
7. 2 Setting date and time
After setting the weather forecast the integrated radio clock
attempt to capture (about 10 minutes) the time signal (Date and
time). Could the time signal be detected,
is displayed per-
manently.
If the time signal cannot be received or in case of poor recepti-
on, is displayed. In this case we recommend placing the scale
at a different location. The device attempts to receive the time
signal for 10 minutes every hour, until it has been received.
In normal operation the time is synchronized with the time
signal daily at 2 a.m., 3 a.m., 8 a.m., 2 p.m. und 8 p.m.
Alternatively, the clock can also be set manually.
1. Push and hold the SET key for 2 seconds.
2. Set the year using the UP/DOWN key. Confirm using the SET
key.
3. Set month/day and confirm.
4. Set time (hours/minutes) and confirm.
7.3 Setting the time format 24 h / 12 h
Push and hold the UP key for 2 seconds to change the time for-
mat.
7.4 Setting the alarm function
1. Push the MODE key repeatedly until the alarm time is displayed
2. Then hold the SET key for 2 seconds until the alarm time flashes.
3. Use the UP/DOWN key to set the hours, use SET to confirm.
4. Use the UP/DOWN key to set the minutes, use SET to confirm.
5. The
symbol indicates that the alarm has been activated.
The alarm function can be deactivated by pushing the UP key.
Snooze function: to pause the alarm signal for 5 minutes, push
the
key.
7.5 Setting the timer
1. Push and hold the
key for 2 seconds.
2. Set alarm time using the
key.
3. Use the
key to start the timer.
4. Use the
key or the
key to stop the alarm signal.
66223_Page-Meteo-Center_9277-A_Content_28-07-2014.indd 14
05.08.2014 16:23:32
