16
2.5.3 Initial setting of the date
After the time has been set, the menu will automatically skip to setting the
date.
Confirm using
OK
to change the date.
Use the ▼ key to set the date for each digit and confirm each using
OK
.
Note
It is imperative that you enter the current date, since entering a past date will
result in the wrong allocation of the measured values. The wrong entry can be
corrected only by deleting and re-entering the respective user. Any currently
stored measurement values will be lost.
If the date is set, use the ▼ key to highlight “confirm” and push
OK
.
Note
Implausible entries, e.g. 39.17.2010 will not be accepted.
The basic setting is complete.