BASIC SAFETY INFORMATION
HYD 5K...20KTL-3PH
9
DC switch in the Array junction box. Not doing this may result in
serious injury.
2.1.1
Qualified personnel
Personnel tasked with the operation and maintenance of the device
must have the qualifications, competence and experience required to
perform the described tasks, while also being capable of fully
understanding all instructions contained within the manual. For safety
reasons, this inverter may only be installed by a qualified electrician
who:
-
has received training on occupational safety, as well as the
installation and commissioning of electrical systems
-
is familiar with the local laws, standards and regulations of the
grid operator.
SOFARSOLAR assumes no responsibility for the destruction of
property or any injuries to personnel caused by improper usage.
2.1.2
Installation requirements
Please install the inverter according to the information contained in
the following section. Mount the inverter to a suitable object with a
sufficient load-bearing capacity (e.g. walls, PV frames etc.) and
ensure that the inverter is upright. Choose a suitable place for the
installation of electrical devices. Ensure that there is sufficient space
for an emergency exit which is suitable for maintenance. Ensure
sufficient ventilation in order to guarantee an air circulation for the
cooling of the inverter.
