background image

 16

MAIN POWER UNIT OPERATION 

 

TESTING THE GFCI PLUG: 
WARNING – RISK OF ELECTRIC SHOCK.  The GFCI plug must be tested 
before each use. 
WARNING – If the GFCI plug does not function properly, do not use your spa. 
Call the dealer or factory immediately for instructions.  Do not bypass the GFCI 
plug. 
WARNING – Before inserting the power cord into a power outlet, make sure the 
current rate of the power is suitable for the Main Power Unit. 
WARNING – Do not use extension cords. 
 

1.

 

Insert the plug of the power cord into the power outlet. 

2.

 

Press the RESET button on the GFCI. 

3.

 

Turn on the massage air blower. 

4.

 

Push the TEST button on the GFCI located at the end of the power cord.  The 
GFCI light should go out and the massage air blower should shut off.  If the GFCI 
light does not go out, and the massage air blower does not shut off, the GFCI is 
faulty.  Do not use the spa.  Contact your dealer or the factory immediately for 
instructions. 

5.

 

Press the RESET button on the GFCI.  The light on the GFCI should turn on.  If 
the GFCI light does not turn on, the GFCI is faulty. Do not use the spa.  Contact 
your dealer or the factory immediately for instructions. 

 

 

 

Summary of Contents for 23075























Reviews: