8
PRODUCT CONTENTS
Qty
Description
of
Part
1
Top Safety Cover (zippered)
1
Spa Pool with Speed Safety Valve
1
Main Power Unit - Pump, Filter and Heater
1
Inflator Hose with Nozzle at one end
1
Hose Fitting Wrench
1
Water Drain Plug and Cover
1
Pump / Filter Cover
1 Filter
Cartridge
1 GFCI
Plug
Spa Pool and Pool Cover Main Power Unit
Inflator Hose
Hose Fitting Wrench
Water Drain Plug and Cover Pump / Filter Cover Filter Cartridge
GFCI Plug
NOTE: Ensure to check all parts are present and undamaged before assembly. Report
missing or damaged parts immediately for replacement.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
SITE PREPARATION:
1.
IMPORTANT
- Because of the combined weight of the spa, water and users,
your spa should always be installed on a structurally sound, relatively smooth, flat
and level surface that is capable of uniformly supporting this weight for the entire
time the spa is installed. If the spa is placed on a surface, which does not meet
these requirements, any damage caused by improper support is not covered under
the manufacturer’s warranty. It is the responsibility of the spa owner to assure the
integrity of the site at all times.
2.
Your spa should be connected to a grounded outlet within eight feet of the spa.
There should be easy access to the plug for periodic testing of the cord mounted
GFCI.
3.
Make sure that there are no sharp objects under the spa.
