User Manual
copyright by
21
Flowpad Bedienungsanleitung
Settings button: Press the settings button to switch between the distance of the current trip (TRIP) and the total distance
driven (ODO).
Function button: Press the function button to switch between the three driving modes ECO (energy saving mode), MID
(middle speed mode) and HIGH (high speed mode).
Key combination: Press the settings button and the function button for 1-3 seconds simultaneously to get to the reset mode.
Here you can switch between different interfaces with a short press on the start button. Now push the settings button to
increase the parameter or push the function button to decrease it. Hold both buttons again, go leave the reset mode.
Front light: Short pressing of the start button turns on the front light. A respective symbol appears on the display.
To
turn the light off, push the start button again.
Acceleration lever: The acceleration lever is on the lower right of the display. Activate the acceleration lever slowly with your
thumb, to slowly accelerate your device – or stronger to accelerate faster. Always control the lever carefully and accelerate
stepwise, if you are not familiar with the device yet.
Brake lever: Activate the brake lever lightly to brake slowly – or stronger to brake quicker. Always brake early enough, if
driving towards an obstacle.
Automatic power off: If you do not use your device for a longer period (5 minutes), the motor switches to standby mode.
Press the power button, to restart your device.