32
Handset Use & Electronic Medical
Equipment
This section is based on “Guidelines on Safeguarding
Medical Equipment from Electromagnetic Waves from Mobile
Phones and Other Devices“ (Electromagnetic Compatibility
Conference Japan), and “Research Report on the Influence of
Electromagnetic Waves on Medical Equipment“ (Association of
Radio Industries and Businesses, March 2001).
Keep handset a minimum of 22 centimeters
from implanted cardiac pacemaker or implanted
defibrillator.
Radio waves may interfere with the operation of implanted
cardiac pacemakers or implanted defibrillators.
When using electronic medical equipment
(other than implanted cardiac pacemakers/
defibrillators) outside of medical institutions,
consult device manufacturer about the
influence of radio waves.
Radio waves may interfere with the operation of electronic
medical equipment.
Handset radio waves may affect electronic
medical equipment. Observe these guidelines in
medical institutions:
・Do not bring handset into an operating room, ICU
(Intensive Care Unit) or CCU (Coronary Care Unit).
・Turn off handset in hospital wards.
・Turn off handset even in lobbies or areas where use is
permitted if there is electronic medical equipment nearby.
・Observe the instructions of individual medical
institutions and do not use or bring handset into
prohibited areas.
Keep handset power off in crowded places such
as rush hour trains; a person with an implanted
cardiac pacemaker or implanted defibrillator
may be nearby.
Radio waves may interfere with the operation of implanted
cardiac pacemakers or implanted defibrillators.
Materials
・008Z
Parts
Material/Finishing
Outer Case
(Display side)
PC + ABS resin/UV coating
Outer Case
(side)
PC resin (GF-20) /UV coating
Outer Case
(Battery
Cover) ,
Volume Key
PC resin/UV coating
Display/
Touchscreen,
Camera Panel
Glass
Camera Ring
Aluminum
Light, Home
Key, Menu
Key, Back Key
PMMA resin
Power Key
PC resin/NCVM
Receiver
Stainless steel/NCVM
Speaker
Cloth
External
Device Port,
Screws
Stainless steel
3.5 mm Audio
Jack
Copper alloy
SD Card
Holder, USIM
Card Holder
PC resin (GF-10)
・Battery (ZEBAG1)
Parts
Material/Finishing
Outer Case
PET resin
Terminals
Nickel/gold plating
・AC Adapter (ZECAD1)
Parts
Material/Finishing
Outer Case
PC + ABS resin
Plug
nickel plating
Terminals
gold plating
・Micro USB Cable (ZEDAD1)
Parts
Material/Finishing
Outer Case
PVC resin
USB Terminal
Iron + nickel plating
Micro USB
Terminal
stainless steel
・3.5 mm Headset with Mic (ZELAD1)
Summary of Contents for 008Z
