![background image](http://html1.mh-extra.com/html/softbank/103p/103p_user-manual_1312097016.webp)
1-14
Getting.Started
Handset Security
USIM.PINs
PIN
4 to 8-digit code used to prevent unauthorized handset use.
When PIN Authentication is
ON
, PIN entry is required each time
handset is turned on (with USIM Card installed).
PIN2
Required for call cost setting.
PIN and PIN2 are set to
9999
by default.
PIN.Authentication
Main.Menu
.
4
.Settings.
4
.Security.
4
.PIN.Authentication
1
Enter Phone Password
7
PIN.Authentication
7
ON.
or
.OFF
7
Enter PIN
PIN/PIN2.Lock.&.Cancellation.(PUK/PUK2)
PIN.Lock.or.PIN2.Lock.is.activated.if.PIN.or.PIN2.is.incorrectly.
entered.three.times..Cancel.PIN.Lock.or.PIN2.Lock.by.entering.PIN.
Unblocking.Key.(PUK/PUK2).
For information about PUK/PUK2, contact SoftBank Customer Support, General
Information (
Z
P.9-22).
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
For procedures required to unlock USIM Card, contact SoftBank Customer
Support, General Information (
Z
P.9-22).
Passwords
Phone.Password
<Default>.9999
4.to.8-digit.number.required.to.use/change.some.handset.
functions.
.
■
Change.Phone.Password
>
Main.Menu
4
Settings
4
Security
4
Change.Phone.Password
4
Enter current Phone Password
4
Enter new Phone Password
4
YES
Center.Access.Code.(Security.Code)
4-digit.number.specified.at.initial.subscription;.required.to.access.
Voicemail.via.landlines,.subscribe.to.paid.content.or.restrict.
handset.services.
For procedures required to change Center Access Code, contact SoftBank
Customer Support, General Information (
Z
P.9-22).
If entered incorrectly three times, Call Barring settings lock; Center Access Code
must be changed.
If Security Code has been changed on handset, enter the number to activate/
deactivate Call Barring.
Note
Write down Phone Password and Center Access Code. Do not reveal Phone
Password and Center Access Code. SoftBank Mobile is not liable for misuse
or damages.