19-25
Abridged English Man
u
al
19
Handset Security
PIN1 & PIN2
!
PIN1 & PIN2 are 9999 by default.
!
PIN1 & PIN2 can be changed.
!
When PIN1 Entry is
ON
, PIN1 (4-8 digits) is required each
time 810P is turned on (with USIM Card inserted).
PIN Lock & Cancellation (PUK)
PIN1 Lock or PIN2 Lock is activated if PIN1 or PIN2 is
incorrectly entered three times. Cancel PIN Lock by
entering the Personal Unblocking Key (PUK).
!
For information on PUK, contact SoftBank Customer
Center, General Information (
Handset Code
[Default] 9999
Required to use/change some handset functions.
! "
appears when Handset Code is entered.
Center Access Code
4-digit number specified at initial subscription; required to
access Voice Mail via landlines or subscribe to fee-based
information.
USIM PINs
PIN1
Prevent unauthorized 810P use.
PIN2
Required to clear Total Call Cost or set Cost Limit
and Price/unit.
!
If PUK is incorrectly entered ten times, USIM Card is
locked and handset is disabled. Write down PUK.
!
For procedures required to unlock USIM Card,
contact SoftBank Customer Center, General
Information (
!
When PIN1 Entry is
ON
, emergency numbers (110,
119, 118) cannot be dialed without entering PIN1.
Codes
810P.book Page 25 Tuesday, April 3, 2007 7:40 PM