1-5
1
Getting Started
USIM PINs
For security, the USIM card has two security codes: PIN and PIN2. Do not
forget these codes and do not reveal them to others.
PIN
This is a four to eight digit security code to prevent others from using your
handset. When
PIN Settings
(page 12-2) is set to
ON
, PIN is required each
time the handset is turned on. The default setting is "9999". PIN can be
changed (page 12-2).
PIN2
This is the four to eight digit security code required for operations such as
resetting Call Time&Cost and setting Fixed Dial #. The default setting is
"9999". PIN2 can be changed (page 12-2).
PIN Lock & PUK Codes
PIN lock is set when an incorrect PIN or PIN2 is entered three times
consecutively. PUK (Personal Unblocking Key) codes are required to cancel
PIN lock/PIN2 lock. To obtain PUK/PUK2, contact SoftBank General
Information (page 21-36).
7
If PUK/PUK2 is incorrectly entered ten consecutive times, USIM card is
locked. USIM card lock cannot be canceled. Contact SoftBank General
Information (page 21-36).
Note
Summary of Contents for 814T
