Ap
pen
d
ix
14
14-
18
Specifications
.
Above values calculated with battery installed.
.
Continuous Talk Time is an average
measured with a new, fully charged battery,
with stable signals.
.
Continuous Standby Time is an average
measured with a new, fully charged battery,
with handset closed without calls or
operations, in Standby with stable signals.
.
Talk Time/Standby Time may vary by
environment, status, settings, etc.
.
Display employs precision technology,
however, some pixels may appear brighter/
darker.
[
Handset Materials (Elegant Line)
[
Handset Materials (Active Line)
Specifications
SoftBank 824SH
Weight
Approximately 127
g
Continuous
Talk Time
Approximately 250 minutes (3G)
Approximately 230 minutes (GSM)
Continuous
Standby
Time
Approximately 340 hours (3G)
Approximately 310 hours (GSM)
(handset closed)
Charging Time
(power off)
AC Charger: Approximately
140 minutes
In-Car Charger: Approximately
140 minutes
Dimensions
(W x H x D)
Approximately 50 x 105 x 15.3 mm
(handset closed, without protruding
parts)
Maximum
Output
0.25 W (3G)
2.0 W (GSM)
Parts
Materials & Finishing
Housing (Display side),
housing (Keypad side)
Nylon resin/SUS
(insert-molded),
discontinuous
deposition/UV painting
Housing (Display back
hinge), housing (hinge;
Illumination Light area)
ABS resin, discontinuous
deposition/UV painting
Housing (Display back)
SUS, electrodeposition
coating
Housing (battery side),
Battery Cover
Nylon resin, UV painting
Display window, camera
lens, External Display
window
Acrylic resin
Camera ornament
(Infrared Port, Mobile
Light), Center Key, Start
Key, Power On/Off Key,
Mail Key, Yahoo! Keitai
Key, Shortcuts & A/a
Key, Clear/Back Key, TV
& Text Key, Multi Job &
Manner Key, Keypad
PC resin
Battery Cover Lever
POM resin
Multi Selector
Aluminum, anodized
aluminum paint
Side Keys
PC resin, UV painting
External Device Port Cover,
Headphone Port Cover
PC resin/Elastomeric
resin, discontinuous
deposition/UV painting
Charging Terminals
SUS/Gold plating
(sealer: nickel)
Screw (all pieces)
SWCH12A/Trivalent
chromate, EPDM
O-ring seal
USIM pin
Copper alloy/Gold
plating (sealer: nickel)
Parts
Materials & Finishing
Housing (Display side),
housing (Keypad side)
Nylon resin/SUS
(insert-molded), UV
painting
Housing (Display back
hinge)
ABS resin, UV
painting (ABS resin,
discontinuous
deposition/UV painting
for Silver)
Housing (Display back)
SUS, two-part coating/
UV painting (SUS,
electrodeposition coating
for Metallic Silver)
Housing (battery side),
Battery Cover
Nylon resin, UV painting
Housing (hinge;
Illumination Light area)
ABS resin, discontinuous
deposition/UV painting
Display window, camera
lens, External Display
window
Acrylic resin
Camera ornament
(Infrared Port, Mobile
Light), Center Key, Start
Key, Power On/Off Key,
Mail Key, Yahoo! Keitai
Key, Shortcuts & A/a
Key, Clear/Back Key, TV
& Text Key, Multi Job &
Manner Key, Keypad
PC resin
Parts
Materials & Finishing
