App
end
ix
13
13-
18
Specifications
.
Above values calculated with battery installed.
.
Continuous Talk Time is an average
measured with a new, fully charged battery,
with stable signals.
.
Continuous Standby Time is an average
measured with a new, fully charged battery,
with handset closed without calls or
operations, in Standby with stable signals.
.
Talk Time/Standby Time may vary by
environment, status, settings, etc.
.
Display employs precision technology,
however, some pixels may appear brighter/
darker.
[
Handset Materials
[
Battery
[
Desktop Holder
Specifications
SoftBank 830SH
Weight
Approximately 105
g
Continuous
Talk Time
Approximately 260 minutes (3G)
Approximately 240 minutes (GSM)
Continuous
Standby Time
Approximately 350 hours (3G)
Approximately 320 hours (GSM)
(handset closed)
Charging Time
(power off)
AC Charger: Approximately
130 minutes
In-Car Charger: Approximately
140 minutes
Dimensions
(W x H x D)
Approximately 49 x 97 x 17.6 mm
(handset closed, without protruding
parts)
Maximum
Output
0.25 W (3G)
2.0 W (GSM)
Parts
Materials & Finishing
Housing (Display side),
Display ornament
ABS resin/Acrylic UV
curing painting
(sealer: discontinuous
deposition)
Housing (Display back,
Keypad side, Keypad
back), hinge cover
(Keypad side), Battery
Cover
ABS resin/Acrylic UV
curing painting
(sealer: acrylic
painting)
Hinge housing (left &
right, Display side)
Nylon-based resin
(with glass fibers)/
Acrylic UV curing
painting (sealer:
acrylic and urethane
painting)
External Display
ornament panel
Acrylic resin/Acrylic
UV curing painting
(sealer: printed foil)
Display window, External
Camera window
Acrylic resin
Infrared Port
ABS resin (infrared
grade)
Multi Selector (center,
Cursor Keys)
ABS resin (chrome
plating on nickel
plating)
Start Key, Power On/Off
Key, Mail Key, Yahoo!
Keitai Key, Shortcuts &
A/a Key, Clear/Back Key,
Dictionary & Text Key,
Side Keys, Keypad
PC resin/Painting
Memory Card Slot Cover,
Headphone Port Cover
Urethane-based resin,
PC resin/Acrylic UV
curing painting
(sealer: acrylic
painting)
External Device Port
Cover
Elastomeric resin/
Urethane painting
Display stop rubber
Silicon rubber
Battery, screw cover
PC resin
Charging Terminals
SUS/Gold plating
(sealer: nickel)
Screw (all pieces)
SWCH12A/Ni plating
USIM pin
Copper alloy/Gold
plating (sealer: nickel)
Accessories
Voltage
3.7V
Battery Type
Lithium-ion
Capacity
780 mAh
Dimensions
(W x H x D)
Approximately 37.7 x 44.4 x 4.6 mm
(without protruding parts)
Input Voltage/
Current
DC 5.4V/700 mA
Output Voltage/
Current
DC 5.4V/700 mA
Charging
Temperature
5
o
C to 35
o
C
Dimensions
(W x H x D)
Approximately 65.5 x 23 x 124 mm
Parts
Materials & Finishing