1
Getting Started
1-3
USIM Card Installation
Remove battery (
Z
P.1-12) then follow steps below.
Inserting
1
With IC chip down, insert USIM Card
Removing
1
Slide out USIM Card gently
Note
Do not force USIM Card into or out of handset; may damage handset/
USIM Card.
Be careful not to lose the removed USIM Card.
Avoid touching USIM Card terminals or IC chip; doing so may hinder
performance/USIM Card recognition.
Notch
USIM PINs
There are two USIM Card security codes: PIN & PIN2
PIN and PIN2 are set to 9999 by default.
PIN/PIN2 can be changed (
Z
P.10-3).
PIN
4 to 8-digit code used to prevent unauthorized
handset use.
When PIN Certification is ON (
Z
P.10-2), PIN
entry is required each time handset is turned on
(with USIM Card inserted).
PIN2
Required to clear call costs or set maximum cost
(
Z
P.15-10).
PIN Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly entered
three times. Cancel PIN Lock or PIN2 Lock by entering the PIN Unblocking
Key (PUK/PUK2) (
Z
P.10-3).
For information on PUK/PUK2, contact SoftBank Mobile Customer
Center, General Information (
Z
P.16-30).
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (
Z
P.16-30).
