xvi
Precautions
・
Do not expose handset to liquids (soaps, detergents, soapy water, seawater,
pool water, hot spring water, boiling water, chemicals, or perspiration, etc.)
other than fresh/tap water. Do not expose handset to sand or mud.
・
If handset is exposed to liquid other than fresh/tap water, immediately rinse
off handset with water. Position handset approximately 10 cm from tap or
shower head and wash with a low pressure flow (less than six liters per
minute, at room temperature (5°C - 35°C)). Hand wash (do not use brushes
or sponges) with Battery Cover in place and locked, and Port Cover closed.
・
Do not expose handset to bathtubs or swimming pools. Do not use handset
(open or close handset, or use Keypad) in water.
・
Handset is not resistant to water at high pressure. Do not expose handset
to tap or shower water flowing faster than six liters per minute, drop it into
water, or submerge.
・
Do not expose handset to extreme humidity for long periods; avoid prolonged
use in bath/shower rooms.
・
Use handset within 5°C - 35°C (up to 40°C for temporary use in bath/shower
rooms, etc.) and 35% - 90% humidity.
・
Handset is not heat-resistant. Do not use in saunas. Avoid hot air from dryers, etc.
・
Avoid extreme temperatures (e.g., near stoves, inside refrigerators, etc.).
・
Volume may be low when Microphone/Earpiece/Speaker is wet; dry handset
before use. After drying out, the volume will return to normal.
・
Avoid placing handset directly on sand. Sand may penetrate Earpiece, Speaker,
etc., resulting in low volume.
・
Do not move handset directly from a cold place to a warm, humid place;
condensation may occur. Should this happen, let handset dry naturally, at
room temperature.
・
Handset does not float.
・
Keep handset out of heavy rain.
・
Do not let liquid-exposed handset remain wet; exposure to cold may freeze
liquid causing malfunctions.
Maintaining
Waterproof
Performance
・
Do not subject handset to strong shocks or impacts; do not poke Microphone,
Earpiece, Speaker, etc. with a cotton swab or sharp object;
・
Port Cover and gasket play the important role of maintaining waterproofness.
Do not remove or damage them. In addition, do not allow foreign particles to
adhere to them.
・
Do not insert sharp objects into Port Cover gaps; may damage gasket and
affect water resistance.
・
Do not leave Port Cover bent back for prolonged periods of time to plug
in Earphone Microphone or Charger. It might deform Port Cover affecting
waterproofing.
・
If Port Cover gasket is damaged or deformed, replace it with a new one.
・
To maintain water resistance, replace gaskets every two years regardless of
their condition. For gasket replacements, contact a SoftBank Shop.
・
Damaged Battery/Port Cover affects water resistance; contact a SoftBank
Shop.
Summary of Contents for 840SC
