Getting Started
1
1-8
c
Lift battery up and remove as shown
Charge Battery
・
Use specified AC Charger ZTDAA1 (sold separately).
In this guide, ZTDAA1 is referred to as "AC Charger."
・
If handset is on while Charger is connected,
battery indicator shows charge level, charging
as follows:
→
→
.
flashes
when battery is fully charged. If handset is off,
Charging
... appears while charging and when
battery is charged,
Battery
full
appears. External
Light illuminates in red while charging.
・
An empty battery requires approximately 150
minutes to be charged with power off. Charging
time may vary depending upon the ambient
temperature.
AC Charger
a
Open Port Cover; with label down,
insert Charger Connector into
External Device Port
External Device Port
Port Cover
Charger Connector
AC Charger
Plug
AC 100V
Outlet
AC Charger
b
Pull up AC Charger prongs and
plug it into an AC 100V outlet
c
When battery is charged,
disconnect handset, close Port
Cover, and unplug AC Charger
Summary of Contents for 840SC
