Handset Security
11-4
11
Activating/Canceling Password Lock
After
Password
lock
is activated, Phone Password
is required for handset operations such as turning
on handset or turning off Display. No operations
are accepted until you enter the correct password,
except some operations such as receiving calls.
a
Tap Menu
→
Settings
→
Security
b
Password
lock
c
Select an option
■
To Activate It When Turning Off Display
or On Handset Power
Auto
■
To Activate It When Turning On
Handset
At
power
On
■
To Deactivate It
Off
d
Enter Phone Password
→
Tap OK
Activating/Canceling PIN Code
PINs are security codes for USIM Card. For details,
see "USIM Card" (
P.1-7).
To activate PIN Certification each time the power is
turned on, set this function to
On
.
Setting
a
Tap Menu
→
Settings
→
Security
b
Under
PIN
certification
,
On
or
Off
c
Enter PIN
→
Tap OK
Canceling
If PIN or PIN2 is incorrectly entered three consecutive
times, PIN Lock or PIN2 Lock is activated to restrict
handset operations.
Note
・
For more information about PUK and PUK2,
contact SoftBank Mobile Customer Center,
General Information (
・
Entering incorrect PUK Code ten
consecutive times locks USIM Card (turning
handset off does not reset the count).
・
Once locked, USIM Card cannot be
unlocked. Contact SoftBank Mobile
Customer Center, General Information
(
To cancel PIN Lock or PIN2 Lock, perform following
operations.
a
In PUK Code entry window, enter
PUK Code
→
Tap OK
b
Enter new PIN or PIN2 (four- to
eight-digit)
→
Tap OK
c
Enter new PIN or PIN2 again (four-
to eight-digit)
→
Tap OK
Activating/Canceling USIM Lock
Activate this function to require USIM Password to
use handset with a different USIM Card.
a
Tap Menu
→
Settings
→
Security
b
Under
USIM
lock
,
On
or
Off
c
Enter USIM Password (four- to
eight-digit)
→
Tap OK
・
To set to
On
, enter USIM password (four-
to eight-digit) again and tap OK.
・
USIM Password is dedicated to USIM Card
authentication. If USIM Password matches, another
USIM Card can be used in handset.
Change USIM Password each time
USIM
lock
is
set to
On
.
・
If you forget USIM Password, insert USIM Card
with
USIM
lock
set to
On
and reset all settings
Summary of Contents for 941SC
