1
Getting Started
1-15
■
Desktop Holder Stand
Use Desktop Holder as a handset stand when viewing TV or videos (Viewer
Position). Extend Stand as pictured below.
Hold Desktop Holder for handset operations.
Charging with AC Charger Only
Insert Charger Connector (arrows up) into
External Port. To remove, squeeze Release
Tabs and pull straight out.
Open/Close External Port Cover:
Z
P.xxiv
Note
Make sure not to get strap caught between handset and Desktop
Holder.
For details, read AC Charger instructions.
Tip
Settings
●
Start/End Charging Tone (
Z
P.18-3)
Extend completely
Stand
External Port Cover
Arrows
Release
Tabs
Handset Power On/Off
1
Press and hold
L
Start-up window and waterproof
precautions appear and handset enters
Standby.
Enter PIN if PIN Authentication is ON
(
Z
P.12-2).
2
Press
L
for 2+ seconds
Handset shuts down.
Do not turn on handset immediately
after turning off. Wait a few seconds.
■
Initial Setup
The first time handset powers up and Initial setting window appears, select
YES
and set the following: (Each item can be set separately.)
Date & Time*
(
Z
P.18-9) Set date and time
Phone Password
(
Z
P.12-2)
Enter
9999
, and enter new Phone
Password (4-8 digits)
Key Tone
(
Z
P.18-3)
Select
ON
or
OFF
Font Size
(
Z
P.18-6)
Set Display font size all at once
* May be automatically set
Standby
