background image

17

SAFETY PRECAUTIONS

Please read the safety precautions carefully to ensure the correct use of your translator.

Do not disassemble, modify or repair the device or the battery by yourself, otherwise the warranty will be 

invalid.

Do not crush, throw, or puncture your device. Avoid dropping, squeezing, or bending your device.

Do not use your device in a moist environment.

The charging temperature of battery should be 10

—+40

.

Do not expose your device to areas with flammables and explosives.

Do not turn on your device when it is prohibited to use.

For driving safety, the driver cannot operate the device when the car is in motion.

Use a dry soft cloth to clean the device; do not use water, alcohol, detergent or any chemicals.

Keep the device battery and charger out of the reach of children to prevent them from swallowing it or 

injuring themselves by accident. Children should only use the device with adult supervision.

Observe all rules and regulations applicable to mobile products in hospitals and health care facilities.

Only use the battery included with the product.

This equipment complies with MPE ICNIRP radiation exposure limits. This equipment should be installed

and operated with minimum distance 25 cm between the radiator and your body. This transmitter must not 

be co-located or operating in conjunction with any other antenna or transmitter.

SAR information

This device complies with the RE Directive (2014/53/EU). A minimum separation distance must be 

maintained between the user’s body and the device, including the antenna during body-worn operation, to 

comply with RF exposure requirements.

CE Head SAR(0mm)≤2.0W/kg (10g)

CE Body SAR(5mm)≤2.0W/kg (10g)

Limbs SAR(0mm)≤4.0W/kg (10g)

The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy 

absorbed by the body when using a device. This device meets guidelines for exposure to radio waves, and 

is designed not to exceed those limits.

Do not dispose of used device in a household rubbish bin.

The device connected to a USB interface of version USB2.0.

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 

2014/53/EU.

10 Whiz Safety Precaution

Summary of Contents for P00000401A01

























Reviews: