SoftBank P00000401A01, Quick Manual

8

Check that the supplied voltage is appropriate for the battery charger.

Do not use any power source or voltage other than that specified (AC 100 to 240 V, 50 to 

60Hz).

Failure to use the proper power source or voltage may cause fire, injury, electric shock,

damage, malfunction, overheating, leakage, chemical explosion, or other damage to the

machine, battery charger, battery or notification pager.

Make sure that dirt or other foreign matter do not adhere to the battery charger.

Do not use in a dusty place. If the plug is dusty, unplug it from the outlet and wipe with a dry 

cloth.

Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating, 

leakage, chemical explosion, or other damage to the machine, battery charger, battery or 

notification pager.

Do not use the battery charger or power cable if damaged.

Doing so may cause fire, injury, electric shock, damage, malfunction, overheating, leakage, 

chemical explosion, or other damage to the machine, battery charger, battery or notification 

pager.

The battery charger is designed specifically for the machine. Use only the supplied 

designated power cable.

Failure to use the supplied designated power cable may cause fire, injury, electric shock, 

damage, malfunction, overheating, leakage, chemical explosion, or other damage to the 

machine, battery charger, battery or notification pager. Do not use the power cable with any 

another product.

Always unplug the battery charger from the outlet if not using it for a long time or when 

carrying out maintenance on it.

Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating,

leakage, chemical explosion, or other damage to the machine, battery charger, battery or

notification pager.

If the battery charger is not operating normally, takes a longer time to recharge than 

normal, or if it produces sparks, smoke, odor, etc., immediately unplug it form the 

outlet,

and contact customer support.

Failure to do so may cause fire, injury, electric shock, damage, malfunction, overheating, 

leakage, chemical explosion, or other damage to the machine, battery charger, battery or 

notification pager.

Do not step on the power cable or otherwise subject it to excessive force when it is 

connected to the battery charger.

May break the terminals on the power cable and cause malfunction or fire.

Use the battery charger distanced at least 10 cm (4 inches) from a wall so as not to 

block its air vents.

Blocked air vents will cause the temperature in the battery charger to rise, and may cause 

fire or malfunction.

If thunder is audible, unplug the battery charger from the outlet.

Failure to do so may damage the battery charger.

The battery charger may get hot so take caution on handling during or right after 

charging.

Failure to do so may result in burns or other injuries.

Do not use in a location where vibration or impact is applied.