K-Scan PC User Manual 文書番号：SFT-20070171
Page 21 of 35
1
List box
Display 8 Data Items.
CH: Index of Channel.
Data Item: name of each Data Item.
Value: sensor values of each Data Item.
Unit: units of each Data Item.
2
File Name
Display a filename.
When ‘Use Date/Time’ is displayed, the filename is
created by date and time before start recording.
(A filename will be given such as
‘LOG2007_Jan_01_12_00_00.csv’)
3
Record Time
Display a record time.
If the record time is ’00:00:00’, it will works as ‘Manual
Stop Mode’. The recording will be continued till the Stop
button is clicked.
4
Channel
Display a selected trigger channel.
If there is no trigger, blank will be displayed.
5
Low
Display the limit value of low-level trigger.
When sensor value of the Data Item becomes less than
the limit value, the recording will be started.
6
High
Display the limit value of high-level trigger.
When sensor value of the Data Item becomes more equal
than the limit value, the recording will be started.
7
Time
Display an elapsed time of the recording.
8
State
Display three recording state.
1. Ready
Before click a start button.
2. Waiting
Waiting a trigger.
3. Recording
Recording sensor values.
9 [Toolbar]
View Setting button
Show Select Data Items Dialog.
（
See
４
-
７
-
１
Select Data Items
）
10 [Toolbar]
Recording Setting button
Show Data Recording Setting Dialog.
（
See
４
-
７
-
２
Data Recording Setting
）
11
[Start] button
Start recording sensor values.
If there is a trigger, ‘Waiting’ is displayed. After the
trigger is taken, ‘Recording’ will be displayed and the
recoding will be started.
12
[Stop] button
Stop recording or waiting.
13
When this screen is displayed
When the ECU is not connected, the ECU connection
will be started. If failed to connect to the ECU, the
Message 7 will be shown See the
５
-
１
Message List).
