K-Scan PC User Manual 文書番号：SFT-20070171
Page 23 of 35
４-７-２
Data Recording Setting
This dialog is used to set Data Recording settings.
Figure 13
Data Recording Setting Dialog
1
Recording Time
Set the record time (H: hour M: minute S: second) by
spin controls.
2
File Name
Display a file name.
3
[Date/Time] button
Set the filename by date and time.
‘Use Date/Time’ will be shown.
4
[…] button
Show a dialog to set the file name.
5
Trigger check box
Set the trigger mode enable or not.
6
Channel
Set a channel to a trigger.
It is possible to select ‘CH0’ – ‘CH7’.
7
Selected Item
Display the Data Item names of the selected channel.
8
Low
Set the low-level trigger value by a spin control. If the
value is 0, the trigger will be ignored.
9
High
Set the high-level trigger value by a spin control. If the
value is 0, the trigger will be ignored.
10
[OK] button
Save settings and close this dialog.
11
[Cancel] button
Cancel settings and close this dialog.
