SFT2500C 32 in 1 IP to Analog Modulator User Manual
4
4
Chapter 2 Installation Guide
2.1 Acquisition Check
When user opens the package of the device, it is necessary to check items according to packing
list. Normally it should include the following items:
SFT2500C 32 in 1 IP to Analog Modulator
User’s Manual
Power Cord
If any item is missing or mismatching with the list above, please contact local dealer
.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main steps of the installation include:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing SFT2500C 32 in 1 IP to Analog Modulator
Connecting signal cables
Connecting communication port (if it is necessary)
2.2.1 Device’s Installation Flow Chart Illustrated as follows
：
2.2.2 Environment Requirement
Item
Requirement
