ALUMINA
3
RACK INSTRUCTIONS
3
Installation of the Rack
1
For 2” racks only. Check to make sure that the
nut inside the rack hitch bar is aligned with the
hole in the hitch bar. Adjust with a screw driver if
necessary.
2
Place the lock washer on the hitch bolt and thread
it into the nut in the hitch bar. For 2” racks tighten
the hitch bolt to 60 foot pounds. For the 1.25” racks
tighten the hitch bolt to 40 foot pounds.
3
To lock the bike rack to the vehicle, press the hitch
lock over the bolt stud.
1
2
3
