background image

 

© 2005, SOHOware

Inc.  “SOHOware” is a registered trademarks of SOHOware, Inc.

 4 

 

Power over Ethernet 

 

The AeroGuard™ AGN1200 Series AP supports both local D.C. input power (adapter 
included) and Power over Ethernet.  This gives you flexibility in approaching an installation 

to support either a wired or wireless backhaul network design.  For a PoE installation, please 
review the following guidelines to assist in the solution: 

 

• 

The AGN1200 Series AP is fully 802.3af compliant. 

• 

Pre-test the PoE injector:  make sure to pre-test a PoE vendor’s solution with the 

AeroGuard™ MIMO AP to make sure there is full compatibility.  Having 802.3af 
compliance does not insure compatibility as some PoE vendors may modify their 

implementation to meet the requirements of specific AP vendors. 

• 

SOHOware’s recommendation:  SOHOware has tested and confirmed that the following 

PoE vendor’s injector is fully compatible with the AGN1200 Series AP: 

 

Source:  Red Hawk / CDT 
 
Model:  BL-8000 PowerSense Series 

 

www.red-hawk.com

 

 

 
 

BL-8551HW Single Port 

• 

Consult the manufacturers instructions regarding 
cabling, device location and other factors for 
installation. 

• 

For Red-Hawk, select the model with the desired 
number of ports.  Note, select the specific 

models that support “higher wattage” devices 
(ie, 20 Watts). 

 
 
 

BL-8520 20 Port Chassis 

 

Summary of Contents for AeroGuard AP

Page 1: ...ance and AP Orientation To obtain the optimum performance from the AeroGuard MIMO AP follow these guidelines when mounting the AP to a wall or ceiling Antenna positioning the antennas are fully articulating to protect against damage from being struck during or after installation For optimum RF connectivity however the antennas should be fully extended straight out to obtain the best RF pattern dis...

Page 2: ...screws provided and aligning the holes in the plate with the threaded holes in the bottom of the AP Mount the L bracket to the wall or ceiling in the desired location note recommendations in Antenna Performance and AP Orientation above Slide the attachment plate onto the L bracket and secure the assembly together with the screws provided The L bracket includes two aligning holes with threads AGN12...

Page 3: ... their fully extended position for best RF performance The interior dimensions therefore should be a minimum of 11 x 11 x 3 inches for full clearance of the AP and antennas Access for cables including Ethernet and power input should be easily accommodated Some enclosures are designed for electrical junction box applications and include access knock outs for conduit Outdoor vs indoor locations SOHO...

Page 4: ...th the AeroGuard MIMO AP to make sure there is full compatibility Having 802 3af compliance does not insure compatibility as some PoE vendors may modify their implementation to meet the requirements of specific AP vendors SOHOware s recommendation SOHOware has tested and confirmed that the following PoE vendor s injector is fully compatible with the AGN1200 Series AP Source Red Hawk CDT Model BL 8...

Reviews: