21
System List:
Show the default and new built system.
It can display a maximum of 5 (including the default base)
New:
Click “new” popup the system editing interface. Enter into the system name and content, click save to save the
system to the list.
Edit:
Selected the system, click “edit” popup the editing interface, click “save” to save the changes. The default system
cannot be edited.
Select All:
All system in the list was chosen; Click the switch again change to all don't choose, all not to choose.
Delete
: Select the newly systems can be deleted. The default system cannot be deleted
Closing system management
:
Click on close, out of management interface and save existing system.
Counter Source name:
maximum 30 characters, Chinese and English characters, numbers, symbols, name cannot
be blank or overlapped.
Click
【
Other
】
Carry Source:
Click the pull-down menu to check the added counter.
Set the counter which the carry is based on (e.g there are counter 1 and counter 2, set the carry source of counter 2
to be counter 1, then only after counter 1 reached to the maximum value, counter 2 will carry over.)
Current Value:
Set the current value of the counter, value should be within the begin value and maximum value.
Repeat Index Value:
Set the current repeat index value, only settable while repeat value is not 0, repeat index
value range is 0-repeat value.
Pre-zero:
Pre-zero setting of counter, four options: 0001, ___1, 1___, 1.
Alarm:
Whether to give an alarm while counter reach the maximum value. User can switch this option on or off.
Add Counter Source into Text
Please refer to
Create Text Object
Save Message
Please refer to
Save Message
