34
Carry System
: User can select different carry systems, if need to add a new one, click
【
Edit
】
System List:
Show the default and new built system.
It can display a maximum of 5 (including the default base)
New:
Click “new” popup the system editing interface. Enter into the system name and content, click save to save the
system to the list.
Edit:
Selected the system, click “edit” popup the editing interface, click “save” to save the changes. The default system
cannot be edited.
Select All:
All system in the list was chosen; Click the switch again change to all don't choose, all not to choose.
Delete
: Select the newly systems can be deleted. The default system cannot be deleted
Closing system management
:
Click on close, out of management interface and save existing system.
【
Advance
】
:
Carry Source:
Click the pull-down menu to check the added counter.
Set the counter which the carry is based on (e.g there are counter 1 and counter 2, set the carry source of counter 2
to be counter 1, then only after counter 1 reached to the maximum value, counter 2 will carry over.)
Current Value:
Set the current value of the counter, value should be within the begin value and maximum value.
Repeat Index Value:
Set the current repeat index value, only settable while repeat value is not 0, repeat index
value range is 0-repeat value.
Pre-zero:
Pre-zero setting of counter, four options: 0001, ___1, 1___, 1.
Alarm:
Whether to give an alarm while counter reach the maximum value. User can switch this option on or off.
【
Character
】
:
Font
: Select the font.
Size:
Set the font size.
Font effect:
Bold,
Italic,
Add under horizontal line,
Add font with horizontal
line
Cut Edge:
Set the objet with/without white edge
