Insufficient Power
21
P/N: 1006148-01
Managing P
o
wer
2. Connect the other end to the power port on the receiver.
Figure 16: Connect the Charging Cradle and Receiver
Insufficient Power
If the batteries become fully discharged and an external power supply is not connected, the receiver will shut
down and automatically save recorded files. To avoid disruptions, check the BAT LED on the display panel for
the battery charge status. See “Battery LED” on page 13 for more information.
If the receiver shuts down due to insufficient power, the receiver and all communication ports become de-
activated.
To restore power to your receiver and turn it back on, do one or all of the following:
•
Recharge the batteries.
•
Make sure the power cable is correctly connected to the receiver’s port.
a. Align the keyways when connecting the power/serial cable to the receiver port.
b. Turn the cable lock clockwise until it clicks to secure the cable in place.
c. To disconnect the cable, turn the lock counter-clockwise, and then gently remove the cable.
•
Connect the receiver to a different power source.
The Batteries in the Charging
Cradle do not Charge the
Internal/Detachable Batteries.
The Charging Cradle Powers the
Receiver
Power supplied to the receiver should match the specifications provided by Sokkia on the product.
Failure to comply with these specifications may damage the receiver. See “Specifications” on
page 43.
