GSR2600
7
Chapter 2
Quick Start System
Setup
It is quite simple to set up the GSR2600 to collect data and
to configure the GSR2600 to transfer the collected data to
your PC for post-processing. This chapter explains briefly
how to set up the GSR2600 in the field or office.
2.1
Setting Up at the Office
In a typical GSR2600 office setup, the PC is connected to the
receiver’s COM1 port, and a 12 V power supply is
connected to the receiver’s PWR port.
Use the office setup to:
•
Load a schedule on the receiver using Planning
software
•
Transfer collected data from the receiver to your PC
The following steps describe how to configure a typical
office setup:
1.
Place the GSR2600 on a desk, or other suitable work
surface.
2.
Use the PC Data cable to connect the PC to COM1 on
the GSR2600.
CAUTION
See Section 1.6, GSR2600 Usage Cautions, on Page 6 for a list of items
you should be aware of as you set up and use the GSR2600.
750-1-0093 Rev 1.book Page 7 Friday, June 28, 2002 4:02 PM
