User Guide
Rack Mounting
CAUTION
PHYSICAL INJURY HAZARD
This Vulcan unit is not intended for use by persons (including children) with reduced physical, sensory,
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
Failure to follow these instructions can result in injury or equipment damage.
Vulcan and energy Store units feature a narrow
design that is suitable for rack mounting.
Figure
15.
illustrates a 12.2kWh Vulcan system placed
into a 42', 24U equipment rack using a 1U
mounting tray. Connections can be made front
and back for all input and output power.
Specific Cautions
1. Ensure proper ventilation when doors are
attached to the rack, allowing for air to be
exhausted at the top of the rack or top of the
front door.
2. Properly secure the rack to mitigate any
tipping hazard.
3. Use a 1U mounting shelf that has a load
capacity of at least 150 lbs and secure it firmly to
the rack mounting rails.
4. Leave adequate maintenance loops on all
cables into and out of the Vulcan unit.
Figure 15. Example rack mounting configuration.
Battery Energy Storage and Power Solutions
© Sol Donum
™
2022
37