30
31
There are different ways who can help to extend the life of your mini wing. One way is
to fold the mini wing right. It’s most important to watch out for the reinforcements to
maintain the take off characteristics and the performance. We are recommending the
“Origami Method” and the use of a Origami-Pack Sack (see below). Together with your
mini wing you get a traditional pack sack who also protects your mini wing. How to use
it we describe after the “Origami Method”.
PACKING YOUR MINI WING
Traditional-Method
Step 1: Bundle up your mini wing in form
of a cabbage. This way you’re avoiding
that the mini wing drags over the ground
during folding.
Step 2: Begin with the center of the trailing
edge. Put one profile over the other. Each
side separate.
Step 3: Now do it in the same way
with the leading edge profiles. Put the
reinforcements of top and bottom in the
right way, don’t close the cell openings
and push out the fabric.
Step 4: Fold the wing like an accordion from both sides and put one side over the other.
Now all reinforcements are laying side-wise one above the other.
Step 5: Fold the sack as shown in the
photo. This method is very gentle to the
more stiffer parts of the mini wing.
Step 6: At last put the mini wing into the protection bag.
