8
9
Cross X battens
s t re n g t h e n i n g
the nose profile.
Dual Control.
Our double 3D Shaping is a three dimensions modeling
technology that reduces wrinkles and imperfections on
the leading edge construction, improving the overall
aerodynamic performance.
Greater lift (glide) due to optimization of the central
area of the wing with less inclined profiles and a more
homogeneous pressure distribution over the whole
canopy wingspan resulting in gains of glide and speed.
is a hybrid system of risers and lines to guarantee stability,
reduction in line consumption and a better load distribution on
the canopy with significantly less deformation tendency over
the time.
At the leading edge.
Tecnologias
Profiles between the cells of the trailing edge, which improve
performance and handling.
New Air Foil design increases and keeps the internal
pressure more estable and results in more performance
in all speed range.
Is the hybrid utilization of various types of fabrics and
lines. An optimised combination of durability and
resistance with low deformation and less weight.
Higher Project Aspect Ratio.
Cutting edge technology laser equipments prepare all
molds and parts of the canopy.
Reflex profile with great stability and suspension.
The reflex profile relocates the weight distribution
to the front of the profile. This let the power glider
fly in front of the pilot angle, creating speed, stability
and safety in turbulence.
Load Distribution Tapes.
Flexible nylon battens reinforcements.
High Tech Lines.
Tensile Power Tapes.