42
43
Step 4: Fold the paramotor wing like an accordion from both sides and put one side
over the other. Now all reinforcements are laying side-wise one above the other.
Step 5: Fold the sack as shown in the
photo. This method is very gentle to
the more stiffer parts of the paramotor
wing.
Step 6: At last put the paramotor wing into the protection
bag.
Step 1: Open your back pack and put your
paramotor wing in.
Storing
Back Pack
Most part of the paramotor wing fabric is Nylon. As all other synthetic materials it
suffers and deteriorates under the influence of ultraviolet radiation (UV). It looses
his stiffness and gets more porous. Whenever it is possible avoid to submit your
paramotor wing to the sun light, it has a high (UV) rate, especially in heights. It is
recommended to store your paramotor wing very well whilst it not in use. It should be
stored dry in a dry place, protected from (UV) rays, distant from chemical products.
Avoid to store the paramotor wing in hot places like the trunk of a car.
We recommend that you store your equipment in the back pack. That way it is easy
to transport and protect. Your back pack was designed to be useful and comfort. Do
it this way:
Step 2: Store your helmet and accessories
in the upper part of the back pack.